Reference: T1601rc
Brand: Trackmate Racing
Trackmate Iridium transponder for RC car.New version, half the size.
Reference: DL961
Brand: Trackmate Racing
New in version 9.72 Feb, 2023 A software download link will be sent via email. May take up to 1 Hour Software for slot car lap counter. Requires Trackmate hardware. Also has a demo mode which simulates races that requires no hardware... click view for more details
Reference: Iridium-m
Brand: Trackmate Racing
Compatible with the Trackmate RC lap counter. Installed in a bridge that goes across the track. Each one can cover 14.5"(36cm). Connecting cable is included.
Reference: DP3001-SELECT
Brand: Trackmate Racing
Guide Flag Sensor. Stock some spares. Enter Track Thickness in Text field and click save
Reference: 810
Brand: Trackmate Racing
Complete package hardware and software. Infrared RC Lap Counter / Timer for radio Controlled cars. This is everything you need to start racing on a track that is 10 feet wide.
Reference: trans-10
Brand: Trackmate Racing
SAVE 34% Transponders pack of 10 for R/C cars
There are 143 products.
Reference: SCL3C-usb
Brand: Trackmate Racing
If you are looking for a Dead strip or Reed switch solution this is the kit you need, Or if you want to do infrared but can't use any of the bridges available in the other kits. Includes Interface New SCL3-USB with USB integrated 10 foot USB Cable 5 foot Sensor Cable Relay Jumbo Switch Please select number of lanes and sensor type
Reference: SCL3-DS
Brand: Trackmate Racing
Dead Strip Kit. Very reliable dead strip lap counting. A dead strip is a section of track about 3 inches of isolated non powered rails. Normally used in large commercial hand routed tracks. Not recommended for plastic tracks. Click view select number of lanes.
Reference: RLY8
The perfect relay panel for 1:24 scale commercial tracks that run on batteries or 50 amp to 95 amp power supplies. Relay panel comes with 8 relays and master relay. Can be easily connected to Trackmate interface.
Brand: Trackmate Racing
LED tree 6 inches high. Compatible with DP3000 (Drag Pro) and DP2000
Reference: SCL3-2HO
Brand: Trackmate Racing
Budget 2 Lane HO Reed (magnet) switches. Our lowest cost lap counter for 2 Lane HO lap counters. Easy to install, simply put reed switches under your Tomy/AFX track. The very sensitive reeds make it comptible with all HO cars.
Reference: T5Z
Brand: Trackmate Racing
For Mini-z only. Has connector for Mini-z (2.4ghz) Compatible with 3 or 4 pin connectors. SAVE 34% Transponders pack of 5
Reference: DP500-EXT132
Brand: Trackmate Racing
132 FEET extension cable for speed, finish, Compatible with DP500 outdoor Drag Racing,
Reference: trc-5
Brand: Trackmate Racing
SAVE 34% Transponders pack of 5 For R/C cars
Reference: SCL-R
Brand: Trackmate Racing
Discontinued.Replacement module for Trackmate Lap Counter. Click details to see power adapter options.
Reference: wstart
Brand: Trackmate Racing
WIRELESS Start button. Includes 2 remotes. Start race without using keyboard or mouse.
Reference: ir3
3 Infrared bars for DP2000 HO, This will provide infrared light for the sensor mounted in the Track. Not required for systems using guide flag sensors. Now already included in the DP2000 system
Reference: TR3010C
Brand: Trackmate Racing
Power Supply 3 year warranty! Slot Car power supply. Get faster acceleration and consistent power. Ideal for HO and 1:32 scale. Up to 30volts. Cooler running motors. No power surge when car deslots. Short circuit protection. Digital Voltage and Current Readouts. Coarse and fine voltage adjustments.Only one power supply required for a 4 Lane track.
Reference: DPwin
Brand: Trackmate Racing
Win Lights, cable, power adapter and Brackets included. Only one shown in picture, but comes with two one for each lane....
Reference: IridDecoderUSB
Brand: Trackmate Racing
Infrared RC Lap Counter / Timer for radio Controlled cars. For a complete system purchase overheads and transponders. Works with any scale, Mini-z to 1/5 scale....
Reference: SCL3
Brand: Trackmate Racing
Substitute module for the Trackmate SCL81 USB Lap/Timer Counter, originally designed in 2014. Features integrated USB functionality, eliminating the need for a USB to serial adapter. Capable of supporting 8 lanes and compatible with 8-pin sensor cables.
Reference: SCL3
Brand: Trackmate Racing
Replacement module for Trackmate SCL45 USB Lap Counter. Designed in 2022. Integrated USB, no USB to serial required. Compatible with RJ45 sensor cables. Supports 4 lanes and 4 relays.
Reference: truestart
Upgrade board to True Start. Red light option. True start, who red lights the most loses or select racer who red lights first loses, which makes a difference when doing Dialin.
Reference: DP3003
Brand: Trackmate Racing
Optional win lights on cable. Uses two super bright LEDs per lane. Plugs into Drag Pro 3000 module. Customer must build ther own support bracket.
Reference: DPS1000U
Brand: Trackmate Racing
Add a third mid sensor to your DP3000. On a 55 foot track this would normally be a scale 1000' sensor. Plugs int AUX port of DP3000. U-sensors included.
Reference: TR3005B
Brand: Trackmate Racing
Power Supply Slot Car power supply. Up to 30volts! 5 AmpsGet faster acceleration and consistent power. Ideal for 1:32 scale. Running Scalextric, Ninco, Carrera cars etc. . Cooler running motors. No power surge when car deslots. Short circuit protection. Digital Voltage and Current Readouts. Coarse and fine voltage adjustments.Only one power supply...
Reference: IRrec-stagev30
Infrared Reciver Stage box. 2 holes V3.0,
Reference: TX2
Brand: Trackmate Racing
Infrared transmit beam, used with infrared receiver. Easy to align. Used with outdoor timing systems.
Reference: IRrec
Infrared Reciver box. Easy to align, works with IR transmitter.
Reference: RLY4
Relay panel with 4 relays, one per lane giving the ability to control each lane individualy. Call for details
Reference: SCL-USB-Dragv670
Brand: Trackmate Racing
DP3000/DP2000 Trakmate software and drivers. Software only on name brand Kingston 8GB Flashdrive. May not be exactly as shown. We also provide free downloads with all our products.
Reference: DPSF
Speed Finish cable for U- sensors, Sensors not included. Please enter length of cable you want in box below
Reference: DP-split
Position two 16-inch trees in a back-to-back configuration or opt for two 6-inch trees to ensure visibility from the finish line. This setup enables proper viewing and conveniently swaps the left and right sides for accurate observation. Cables are included for a complete package.
Reference: DragPro-DL
Brand: Trackmate Racing
DP3000/DP2000 Trakmate software and drivers. You will receive an email with a download link within one hour.
Reference: DPS1000HO
Brand: Trackmate Racing
Add a third mid sensor to your DP3000HO for HO scale . This would normally be a scale 1000' sensor. Plugs int AUX port of DP3000. sensors included.
Reference: TR-500-finish
Brand: Trackmate Racing
Speed/finish cable 10 ft DB9male to 4x plugs(4P4C) for speed and finish sensors on DP500/DP900
Brand: Trackmate Racing
Prestage/Stage cable for DP500 or DP900 . Works tihe Stage 3.0 or Stage 4.0
Reference: TM-DPR
Brand: Trackmate Racing
Includes crimper, 12x connectors for sensors. 3x male 9 pin and 2x female 9 pin connectors with shell and 30 feet of 4 conductor cable. Instructions with pictures.
Reference: DP905
DP500 Software 10.0 and DP500 .942 software download. Includes phone and/or remote login support. If you are buying a new system you do not need to buy the software seperately. A link will be sent for download
Reference: GANTRY
Brand: Trackmate Racing
Gantry (Bridge) Uses infrared LEDs for light source. Recommended when using infrared sensors for lap counter . Includes DC adapter. Wires can go through table and be completely hidden. (Track not included). Click view and select type
Reference: TM60sensor
2 Lane 60 foot sensor cable for DP500 / DP900 drag systems. This an actual 60 foot cable not scale 60 foot
Reference: TM6sensor
2 Lane 6 ft sensor cable for scale 60ft times on RC drag systems
Reference: C4038
Brand: Scalextric
Optimum Number 22
Reference: TM-STAGEU
Brand: Trackmate Racing
Prestage stage/ stage cable for U-sensors. Does not include sensors
