Download Software v7.41 Windows 8,10,11 (Recommended) Includes Manual and drivers
Donwload for older Windows XP,7 Windows XP,7 Includes Manual and drivers
Download Manual PDF
How to install
You need to install two programs
Then install USB-to-serial. There are two USB-to -serial files, one is specifically for windows XP or Vista machine. Then plug USB cable in. It may take a minute for drivers to install. Then run the RC lap counter, you should see the short cut on your desktop.
The transponders are smaller now, are they still compatible with the old ones?
The new transponders released in March 2016 are only half the size 21mm x 10mm with the same performance
What is the voltage range for the transponder?
Normally it will will be plugged into an empty receiver channel providing 5 volts, but if connected directly to a battery it is 13 volts max. It can run on 1s to 3s lipos
What is the difference between the Mini-z and the regular transponder?
Both transponders are the same only the connector is different
Can I use the RC transponder for quadcopters?
You should use the transponder specifically made for quadcopters
Is the system compatible with other transponders?
No but the good thing is our transponders are the least expensive on the market
How to transfer names to new version of software?
Copy racers_all.txt found in data directory example: program files(x86)iridium650datanamesracers_all.txt to program files(x86)iridium690datanames
Text to speech error... There are two programs in the voice driver directory on flash drive/cd run those two programs then voice should work or download from here. http://www.trackmateracing.com/drivers/
Transponder not working
LED should blink once every 7 seconds. If the LED is blinking quickly it will not work. This may be caused by having transponder plugged in backwards. On some Mini-z cars versions transponder will not work and will require a direct connect to the battery. We provide an adapter cable for that purpose
Interface not found
You may need to install USB to serial FTDI driver (for blue decoder board). IF you are using the older red decoder it required a USB to serial cable and a USB driver for it.