Reference: T1601rc
Brand: Trackmate Racing
Trackmate Iridium transponder for RC car.New version, half the size.
Reference: PD6
Brand: Trackmate Racing
High quality power distribution box, no soldering or crimping required. Simply strip 3/16 inch from wire end and insert and screw down. One input and 6 power tap outputs. One required per lane. Board can be removed and then box can be securely screwed down for easy mounting.
Reference: DL961
Brand: Trackmate Racing
New in version 9.61 June, 2020 A software download link will be sent via email. May take up to 1 Hour Software for slot car lap counter. Requires Trackmate hardware. Also has a demo mode which simulates races that requires no hardware... click view for more details
Reference: SCL3-IR
Brand: Trackmate Racing
Infrared Slot Car Lap Counter. Order this system if you to use something other then the pre-built Trackmate Bridge. Includes: Trackmate SCL3 USB Interface , 10 foot USB cable, 5 foot sensor cable, relay to control track power, jumbo switch to pause and restart race (track calls).
Reference: CBL-s
Brand: Trackmate Racing
Sensor Cable with 8 pin connector (RJ45). For new black Trackmate interface SCL3-USB. Available in Infrared, Dead Strip and Reed type. Click view then select cable type.
Reference: trc-5
Brand: Trackmate Racing
SAVE 34% Transponders pack of 5 For R/C cars
There are 42 products.
Reference: T1601rc
Brand: Trackmate Racing
Trackmate Iridium transponder for RC car.New version, half the size.
Reference: PD6
Brand: Trackmate Racing
High quality power distribution box, no soldering or crimping required. Simply strip 3/16 inch from wire end and insert and screw down. One input and 6 power tap outputs. One required per lane. Board can be removed and then box can be securely screwed down for easy mounting.
Reference: DL961
Brand: Trackmate Racing
New in version 9.61 June, 2020 A software download link will be sent via email. May take up to 1 Hour Software for slot car lap counter. Requires Trackmate hardware. Also has a demo mode which simulates races that requires no hardware... click view for more details
Reference: SCL3-IR
Brand: Trackmate Racing
Infrared Slot Car Lap Counter. Order this system if you to use something other then the pre-built Trackmate Bridge. Includes: Trackmate SCL3 USB Interface , 10 foot USB cable, 5 foot sensor cable, relay to control track power, jumbo switch to pause and restart race (track calls).
Reference: CBL-s
Brand: Trackmate Racing
Sensor Cable with 8 pin connector (RJ45). For new black Trackmate interface SCL3-USB. Available in Infrared, Dead Strip and Reed type. Click view then select cable type.
Reference: trc-5
Brand: Trackmate Racing
SAVE 34% Transponders pack of 5 For R/C cars
Reference: TM104-BLK
Brand: Trackmate Racing
This is a driver station also called a controller hook up panel. Accepts banana plugs or aligator clips. 10 amp Direction switch. Compatible with electronic controllers. LED indicators. *** NOW IN COLOR
Reference: Jumbo
Track call button. Start and pause race. Normally uses with the relay option. Connect one or many.
Reference: TR1640b
Brand: Trackmate Racing
Power supply for Slot cars 1:24 scale Drag Racing. One per lane strongly recommended for slot cars that can do over 50 mph
Reference: trans-25
Brand: Trackmate Racing
SAVE 37% Transponders pack of 25 for R/C cars
Reference: RLY4
Relay panel with 4 relays, one per lane giving the ability to control each lane individualy. Call for details
Reference: SCL3-DS
Brand: Trackmate Racing
Dead Strip Kit. Very reliable dead strip lap counting. A dead strip is a section of track about 3 inches of isolated non powered rails. Normally used in large commercial hand routed tracks. Not recommended for plastic tracks. Click view select number of lanes.
Reference: SCL3
Brand: Trackmate Racing
Replacement module for Trackmate SCL3 USB Lap Counter. Click details to see power adapter options.Designed in 2014. Integrated USB, no USB to serial required. Compatible with RJ45 sensor cables.
Reference: T5Z
Brand: Trackmate Racing
For Mini-z only. Has connector for Mini-z (2.4ghz) Compatible with 3 or 4 pin connectors. SAVE 34% Transponders pack of 5
Reference: SCL-USB
Brand: Trackmate Racing
Includes all Trackmate software and drivers. Software only on name brand Kingston 8GB Flashdrive. May not be exactly as shown. We also provide free downloads with all our products.
Reference: 403
Brand: Trackmate Racing
Complete package hardware and software. Infrared RC Lap Counter / Timer for radio Controlled cars. This is everything you need to start racing on a track that is 5 feet wide. Includes: 4 overhead detectors 3 Transponders Trackmate USB decoder 10 foot USB cable 20 foot cable to go from decoder to overhead detectors Software 1 year warranty Toll free...
Reference: SCL-2Lkit
Brand: Trackmate Racing
Complete Turnkey 1:32 Scale Slot car lap counter system. Software and hardware Includes: Trackmate SCL3 USB Interface , 10 foot USB cable, 5 foot sensor cable, bridge with infrared leds for overhead light source, relay to control track power, jumbo switch to pause and restart race (track calls). Click View and select track type
Reference: TM103
Brand: Trackmate Racing
This is a driver station also called a controller hook up panel. Accepts banana plugs or aligator clips. 10 amp Direction switch. Compatible with electronic controllers. LED indicators.
Reference: SC104
Brand: Trackmate Racing
Makes connecting to relay very easy, 2 terminal screws for each lane. Two terminal screws for relay coil.
Reference: Iridium-m
Brand: Trackmate Racing
Installed in a bridge that goes across the track. Each one can cover 14.5"(36cm). Connecting cable is included.
Reference: SCLUSB4LHO
Brand: Trackmate Racing
Complete Turnkey Slot car lap counter system. Software and hardware Includes: Trackmate SCL3 USB Interface, 10 foot USB cable, 5 foot sensor cable, bridge with infrared leds for overhead light source, relay to control track power, jumbo switch to pause and restart race (track calls). Bridge measures 6 inches wide and will fit perfectly over Tomy/ Tyco...
Reference: usbab-15
USB cable Type AB for Trackmate interface SCL3usb. 15ft long. This is longest USB cable you can use.
Reference: TR-500-finish
Brand: Trackmate Racing
Speed/finish cable 10 ft DB9male to 4x plugs(4P4C) for speed and finish sensors on DP500/DP900
Reference: SCLW
Wireless track call button, will require to solder 2 wires to the Tackmate interface, instructions included. Works up to 60 feet!
Reference: TR3005B
Brand: Trackmate Racing
Power Supply Slot Car power supply. Up to 30volts! 5 AmpsGet faster acceleration and consistent power. Ideal for 1:32 scale. Running Scalextric, Ninco, Carrera cars etc. . Cooler running motors. No power surge when car deslots. Short circuit protection. Digital Voltage and Current Readouts. Coarse and fine voltage adjustments.Only one power supply...
Reference: IRrec
Infrared Reciver box. Easy to align, works with IR transmitter.
Reference: SCL-USB-Dragv670
Brand: Trackmate Racing
DP3000/DP2000 Trakmate software and drivers. Software only on name brand Kingston 8GB Flashdrive. May not be exactly as shown. We also provide free downloads with all our products.
Reference: SCL3-2HO
Brand: Trackmate Racing
Budget 2 Lane HO Reed (magnet) switches. Our lowest cost lap counter for 2 Lane HO lap counters. Easy to install, simply put reed switches under your Tomy/AFX track. The very sensitive reeds make it comptible with all HO cars.
Reference: DP-clock
Brand: Trackmate Racing
Unlock Timer option in the DP3000. Stop wasting time between races! Use the count down clock to force racers to start race. Completely configurable. A must have for big events. Used by Top Slots Raceway. Includes latest version (6.8) of Drag Pro software. Unlock code will be emailed.
Adapter to use existing 25 pin sensor cable with the newer Trackmate black Interface SCL3-USB with RJ45 8 pin connector. Will only work with 1 to 4 lane cables.
Brand: Trackmate Racing
Complete Turnkey Slot car lap counter system. Includes: Trackmate SCL3 USB Interface , 10' USB cable, sensor cable, bridge with infrared leds for overhead light source, relay to control track power, jumbo switch to pause and restart race (track calls). Bridge measures 10.25 inches wide and will fit perfectly over the 4 Lane MaxTrax.
Reference: 810
Brand: Trackmate Racing
Complete package hardware and software. Infrared RC Lap Counter / Timer for radio Controlled cars. This is everything you need to start racing on a track that is 10 feet wide.
Reference: SCL6L132
Brand: Trackmate Racing
Complete Turnkey 1:32 scale 6 lane Slot car lap counter system. Software and hardware Includes: Trackmate SCL3 USB Interface , Software on CD, 10' USB cable, sensor cable, bridge with infrared leds for overhead light source, relay to control track power, jumbo switch to pause and restart race (track calls). Please select correct track type.
Reference: TX2
Brand: Trackmate Racing
Infrared transmit beam, used with infrared receiver. Easy to align. Used with outdoor timing systems.
Brand: Trackmate Racing
Transponder with Mini-z Connector. Compatible with 2.4ghz kYOSHO Mini-z . No Modifications required, just place transponder on chassis below windshield and plug in the transponder.
Brand: Trackmate Racing
Drag Racing Timing system for HO slotcars. 4 sensors per lane. Pre-stage, Stage, Speed trap and Finish Sensors. Includes our new realistic looking 6" LED tree. Windows XP or Higher Required.
Reference: GANTRY
Brand: Trackmate Racing
Gantry (Bridge) Uses infrared LEDs for light source. Recommended when using infrared sensors for lap counter . Includes DC adapter. Wires can go through table and be completely hidden. (Track not included). Click view and select type
Reference: Reed-4
Brand: Trackmate Racing
Four Reed switches for $14, Including heat shrink, Keep spares. Normally used with HO slot car lap counters.
Reference: DP3000-24
Brand: Trackmate Racing
Drag Pro 3000 Timing System for 1:24 scale slot cars. Complete turnkey timing system. Comes with tree, Prestage, Stage, 60', 1/8, speed, finish sensors. Supports Pro tree, Full Tree and bracket racing.
Reference: ac232
USB to serial. Required if your computer does not have a 9 pin serial port and only has USB ports. New computers will most likely require the USB to serial.
