Reference: T1601rc
Brand: Trackmate Racing
Trackmate Iridium transponder for RC car.New version, half the size.
Reference: Iridium-m
Brand: Trackmate Racing
Compatible with the Trackmate RC lap counter. Installed in a bridge that goes across the track. Each one can cover 14.5"(36cm). Connecting cable is included.
Reference: 810
Brand: Trackmate Racing
Complete package hardware and software. Infrared RC Lap Counter / Timer for radio Controlled cars. This is everything you need to start racing on a track that is 10 feet wide.
Reference: trans-10
Brand: Trackmate Racing
SAVE 34% Transponders pack of 10 for R/C cars
Reference: TRANS-25
Brand: Trackmate Racing
SAVE 37% Transponders pack of 25 for R/C cars
Reference: trc-5
Brand: Trackmate Racing
SAVE 34% Transponders pack of 5 For R/C cars
5 Infrared bars for DP3000 HO, (for small 1/64 scale HO cars) This will provide infrared light for the sensor mounted in the Track. Not required for systems using guide flag sensors.
No soldering required. One bar covers the prestage/stage sensors, scale 60ft, mid and one for speed and one for the finish line sensors. Power supply and wiring included. You will need to make bridges 3 to 4 inches above the track and mount these infrared bars underneath them.
Reference: TM-STAGEU
Brand: Trackmate Racing
Prestage stage/ stage cable for U-sensors. Does not include sensors
Reference: DP-split
Position two 16-inch trees in a back-to-back configuration or opt for two 6-inch trees to ensure visibility from the finish line. This setup enables proper viewing and conveniently swaps the left and right sides for accurate observation. Cables are included for a complete package.
Reference: DPS1000HO
Brand: Trackmate Racing
Add a third mid sensor to your DP3000HO for HO scale . This would normally be a scale 1000' sensor. Plugs int AUX port of DP3000. sensors included.
Reference: DP3000HO
Brand: Trackmate Racing
Drag Pro 3000 Timing system for HO cars. Supports Pro Tree, Full Tree and bracket racing
Reference: DPSF
Speed Finish cable for U- sensors, Sensors not included. Please enter length of cable you want in box below
Reference: DPcoin
Brand: Trackmate Racing
Charge per run with with the Coin option. Call for details
Reference: DPS1000U
Brand: Trackmate Racing
Add a third mid sensor to your DP3000. On a 55 foot track this would normally be a scale 1000' sensor. Plugs int AUX port of DP3000. U-sensors included.
Reference: DP3000-24
Brand: Trackmate Racing
Drag Pro 3000 Timing System for 1:24 scale slot cars. Complete turnkey timing system. Comes with tree, Prestage, Stage, 60', 1/8, speed, finish sensors. Supports Pro tree, Full Tree and bracket racing.
Reference: DragPro-DL
Brand: Trackmate Racing
DP3000/DP2000 Trakmate software and drivers. You will receive an email with a download link within one hour.
Reference: ac232
USB to serial. Required if your computer does not have a 9 pin serial port and only has USB ports. New computers will most likely require the USB to serial.
Reference: DragProDemo
Brand: Trackmate Racing
Bracket Racing tournament software demo. This a demo and can do 10 cars, Add to cart checkout at no cost and you will receive an emial with a link to download the software, check your spam inbox if you don't see it, it may also take 20 minutes. Version .971 updated Dec 17, 2022
Brand: Trackmate Racing
Drag Racing Timing system for HO slotcars. 4 sensors per lane. Pre-stage, Stage, Speed trap and Finish Sensors. Includes our new realistic looking 6" LED tree. Windows XP or Higher Required. Now includes overhead flood bar for the sensors in track
Reference: TR28867
1 part white paper roll. Compatible with SP512, SP200 Printers. Print 300 races on one roll. You can select number of copies in software.
Brand: Trackmate Racing
LED tree 6 inches high. Compatible with DP3000 (Drag Pro) and DP2000
Reference: CBL-9EXT-30
Brand: Trackmate Racing
Serial Cable. Long serial cables allow computer to be far away from the track. Can be used with Red or Green Trackmate SCL slot car interface, DP3000, DP2000.
5 Infrared bars for DP3000 HO, (for small 1/64 scale HO cars) This will provide infrared light for the sensor mounted in the Track. Not required for systems using guide flag sensors.
