RC Lap Counter Standard Package

ncludes:

• 8 overhead detectors to cover a 10 foot track.
• 10 Transponders
• Trackmate USB decoder
• 10 foot USB cable
• 20 foot cable to go from decoder to overhead detectors
• Software - Select free download or USB stick
• 1 year warranty
• Toll free support

 This is a new system with 1 year warranty


Why Buy a Trackmate  RC lap counter?

1. Works with any scale.  Same transponder can be used on 1/24 scale or 1/5 scale.  Even R/C boats
2. Works indoors or outdoors
3. Transponder has a unique ID, so your club can have hundreds of members and not have a ID conflict.
4. Transponders are dirt cheap. 5 for $129, 10 for $250.     
5. Includes easy to use software, but you can also run other software (Flipside Racing, Live RC, Laps Free, Alycat)
6. Reliable lap counting
7. No wires to drive over,  sensor are above ground

Toll Free support  877-756-8227 USA /Canada
International 604-582-1946
System Requirement Windows 2000,XP, Vista, Windows 7, Windows 8, Windows 10, Windows 11
 
Software Features

• Just click Start no complicated setup required
• Sounds for Lap, Personnel best lap,  Overall best lap 
• Practice, Qualify, Race
• Print results
• View all Lap times
• Enter Racers name only once with his transponder ID,  it will then automatically show racers name.
• View live and old results on other devices such Android, iphone, laptops etc.

In Video you will see 1/5 scale racing on dirt, see it go under the sensor bridge.

Theory of Operation

The Iridium System is a complete timing system for Radio Controlled Cars. The transponders use infrared technology, An overhead bar is placed at the start/finish line approximately 22 inches above the track with sensor modules placed every 14 inches. When a transponder passes underneath it will be detected and its ID will be sent to the PC. All 14 transponders can pass through simultaneously and all of them will be detected and counted.

Installation

The overhead sensor units are interconnected with the 12 inch cables supplied. Use as many overhead units as required for the width of your track. One to thirty overhead units can be used. The orientation or which jack is used on the overhead unit does not matter. The overhead units are connected to the lap counting decoder with the included 20 foot cable. The interface board is connected to the PC via the included USB cable. 

Transponders

Transponders are powered by the R/C receiver battery. You would normally plug into an unused servo channel.  It may be mounted in the windshield area or by having a clear area in the front hood of the car it would be possible to mount the transponder there.