Track Power Tap Distribution Box

2 Conductor 18 Gauge Wire, 25 Feet

2 conductor 18 gauge wire 25'  red and black,  Ideal for wiring HO or 1:32 scale tracks. 

Reference: 12v1600n

12V Adapter, 1.6 Amps

12 volt adapter rated to  1.6 amps.  Used on Sell time units with 4 to 8 relays.    Required if you want to power more than 3 relays on a Trackmate interface.  

Reference: TM104-BLK

Brand: Trackmate Racing

Driver Station - 6 Colors

This is a driver station also called a controller hook up panel.  Accepts banana plugs or aligator clips.   10 amp Direction switch.  Compatible with electronic controllers.   LED indicators. *** NOW IN COLOR

Reference: CVGA-XX

Brand: Trackmate Racing

VGA EXTENSION

VGA extension cable - click view button and select length 15 pin Male / Female cable

Reference: Reed-4

Brand: Trackmate Racing

Reed Switches

Four Reed switches for $14, Including heat shrink, Keep spares.  Normally used with HO slot car lap counters.

Reference: flood8xx

Brand: Trackmate Racing

Infrared flood bar + adapter

https://youtu.be/7NRAQ25uLaI?si=04Kl-lH8VNNlePq4&t=146Infrared Flood Bar,   No alignment with sensors required.   Select length required  12 Volt adapter included.  

Reference: GANTRY

Brand: Trackmate Racing

Gantry

Gantry (Bridge) Uses infrared LEDs for light source. Recommended when using infrared sensors for lap counter . Includes DC adapter. Wires can go through table and be completely hidden. (Track not included).   Click view and select type

Reference: TM104-BLK

Brand: Trackmate Racing

Driver Station In Box - 6 Colors

This is a driver station also called a controller hook up panel.  Accepts banana plugs or aligator clips.   10 amp Direction switch.  Compatible with electronic controllers.   LED indicators. *** NOW IN COLOR

Reference: 12v500ma

12V Adapter, 500mA

12 volt adapter. 500ma.  For Slot car interface.  Replaces older 9 volt adapters that were used in the past.Also used on LED Bridge/Gantries.  

Reference: TM103

Brand: Trackmate Racing

Slot Car Driver Station

This is a driver station also called a controller hook up panel.  Accepts banana plugs or aligator clips.   10 amp Direction switch.  Compatible with electronic controllers.   LED indicators.   

Reference: SCLW

Wireless Track Call Button

Wireless track call button, will require to solder 2 wires to the Tackmate interface,  instructions included.  Works up to 60 feet!

Reference: CBL-9EXT-30

Brand: Trackmate Racing

Serial Cable - Select Length

Serial Cable.   Long serial cables allow computer to be far away from the track. Can be used  with Red or Green Trackmate SCL slot car interface, DP3000, DP2000.

Reference: ac232

USB to serial

USB to serial.  Required if your computer does not have a 9 pin serial port and only has USB ports.  New computers will most likely require the USB to serial.

8x 30amp Relay Board For Commercial Tracks

This relay board will handle any track power. Ideal for commercial 1:24 scale type tracks.  30amp relays per lane. Designed to connect to a blue Trackmate interface.  This is not for sell time. All relays turn off/on at the same time.  A 12v 1.6 amp power adapter is required to be used with the Trackmate Blue interface, when using this relay board

Reference: RLY4

Custom 4 Lane Relay Board With RJ45 Cable

Relay panel with 4 relays, one per lane giving the ability to control each lane individualy.  Call for details

2 Conductor 18 Gauge Wire, 100 feet

2 conductor 18 gauge wire 100 feet  red and black,  Ideal for wiring HO or 1:32 scale tracks.