Track Call Button

Reference: 12v500ma

12v adapter

12 volt adapter. 500ma.  For Slot car interface.  Replaces older 9 volt adapters that were used in the past.Also used on LED Bridge/Gantries.  

Reference: SCLW

Wireless track call button

Wireless track call button, will require to solder 2 wires to the Tackmate interface,  instructions included.  Works up to 60 feet!

Reference: flood850n

Brand: Trackmate Racing

Infrared flood bar

Infrared Flood Bar assembled,  A light source for sensors in the track.  No alignment required.   Covers 8.5 inches wide. Connect 12 volts to it. Power adapter not included.      

Reference: CBL-9EXT-30

Brand: Trackmate Racing

Serial Cable - Select Length

Serial Cable.   Long serial cables allow computer to be far away from the track. Can be used  with Red or Green Trackmate SCL slot car interface, DP3000, DP2000.

Reference: GANTRY

Brand: Trackmate Racing

Gantry

Gantry (Bridge) Uses infrared LEDs for light source. Recommended when using infrared sensors for lap counter . Includes DC adapter. Wires can go through table and be completely hidden. (Track not included).   Click view and select type

Reference: Reed-4

Brand: Trackmate Racing

Reed Switches

Four Reed switches for $14, Including heat shrink, Keep spares.  Normally used with HO slot car lap counters.

Reference: usbab-15

USB cable type AB 15ft

USB cable Type AB for Trackmate interface SCL3usb. 15ft long. This is longest USB cable you can use.

Reference: SCL-R

Brand: Trackmate Racing

Slot car Lap Counter Interface only (old type)

Discontinued.Replacement module for Trackmate Lap Counter.  Click details to see power adapter options.

Reference: RLY12V30

Brand: Trackmate Racing

Relay

Relay to control track power.    Also see our Mini relay panel for super easy connections.  

Reference: usbab

USB cable type AB

USB cable Type AB for Trackmate interface SCL3usb. 

Reference: SCL3

Brand: Trackmate Racing

Slot Car Lap Counter 4 Lane Interface-SCL45

Replacement module for Trackmate SCL45 USB Lap Counter.   Click details to see power adapter options.Designed in 2014.  Integrated USB,  no USB to serial required.   Compatible with RJ45 sensor cables.      

Sensor Cable Adapter

Adapter to use existing 25 pin sensor cable  with the newer Trackmate black Interface SCL3-USB with RJ45 8 pin connector.  Will only work with 1 to 4 lane cables.

DIY INFRARED LED KIT

Save dollars on your Slot car lap counter.  This is a Do It Yourself version of the prewired LED kit.  All the parts included to make an overhead light source for an infrared lap counter.  Includes instructions, power adapter, LEDs, heat shrink, Connector and wire.   

Reference: CBL-s

Brand: Trackmate Racing

Sensor Cable 25 pin

Sensor Cable. Older style with 25 pin connector.  Available in Infrared, Dead Strip and Reed type.  Click view then select cable type.

Reference: SCL3

Brand: Trackmate Racing

Slot Car Lap Counter 8 Lane Interface-SCL81

Replacement module for Trackmate SCL81 USB Lap Counter.   Click details to see power adapter options.Designed in 2014.  Integrated USB,  no USB to serial required.  Supports 8 lanes Compatible with RJ45 sensor cables.      

Reference: ac232

USB to serial

USB to serial.  Required if your computer does not have a 9 pin serial port and only has USB ports.  New computers will most likely require the USB to serial.