Infrared Sensors

Reference: Jumbo

Track Call Button

Track call button.  Start and pause race.  Normally uses with the relay option.  Connect one or many. 

Reference: usbab

USB cable type AB

USB cable Type AB for Trackmate interface SCL3usb. 

Reference: 12v500ma

12v adapter

12 volt adapter. 500ma.  For Slot car interface.  Replaces older 9 volt adapters that were used in the past.Also used on LED Bridge/Gantries.  

Reference: SCL3

Brand: Trackmate Racing

Slot Car Lap Counter 8 Lane Interface-SCL81

Replacement module for Trackmate SCL81 USB Lap Counter.   Click details to see power adapter options.Designed in 2014.  Integrated USB,  no USB to serial required.  Supports 8 lanes Compatible with RJ45 sensor cables.      

Reference: flood850n

Brand: Trackmate Racing

Infrared flood bar

Infrared Flood Bar assembled,  A light source for sensors in the track.  No alignment required.   Select the length you need.      

Reference: usbab-15

USB cable type AB 15ft

USB cable Type AB for Trackmate interface SCL3usb. 15ft long. This is longest USB cable you can use.

Reference: SC104

Brand: Trackmate Racing

Mini Relay Panel - 4 Lane

Makes connecting to relay very easy, 2 terminal screws for each lane. Two terminal screws for relay coil.

Reference: ac232

USB to serial

USB to serial.  Required if your computer does not have a 9 pin serial port and only has USB ports.  New computers will most likely require the USB to serial.

Infrared LEDs

Four Infrared LEDs.   These LEDs are extremely good.  Good range and uniform cover.  Perfect alignment is not required. Also check out our complete LED kit with adapter.  

Reference: RLY12V30

Brand: Trackmate Racing

Relay

Relay to control track power.    Also see our Mini relay panel for super easy connections.  

Sensor Cable Adapter

Adapter to use existing 25 pin sensor cable  with the newer Trackmate black Interface SCL3-USB with RJ45 8 pin connector.  Will only work with 1 to 4 lane cables.

Reference: SCL3

Brand: Trackmate Racing

Slot Car Lap Counter 4 Lane Interface-SCL45

Replacement module for Trackmate SCL45 USB Lap Counter.   Click details to see power adapter options.Designed in 2014.  Integrated USB,  no USB to serial required.   Compatible with RJ45 sensor cables.      

Reference: CBL-s

Brand: Trackmate Racing

Sensor Cable 8pin

Sensor Cable with 8 pin connector (RJ45). For new black Trackmate interface SCL3-USB. Available in Infrared, Dead Strip and Reed type.  Click view then select cable type.

Reference: GANTRY

Brand: Trackmate Racing

Gantry

Gantry (Bridge) Uses infrared LEDs for light source. Recommended when using infrared sensors for lap counter . Includes DC adapter. Wires can go through table and be completely hidden. (Track not included).   Click view and select type

Reference: SCLW

Wireless track call button

Wireless track call button, will require to solder 2 wires to the Tackmate interface,  instructions included.  Works up to 60 feet!

Reference: 12v1600n

12v adapter 1.6 amps

12 volt adapter rated to  1.6 amps.  Used on Sell time units with 4 to 8 relays.    Required if you want to power more than 3 relays on a Trackmate interface.