Brand: Trackmate Racing
New in version 9.61 June, 2020 A software download link will be sent via email. May take up to 1 Hour Software for slot car lap counter. Requires Trackmate hardware. Also has a demo mode which simulates races that requires no hardware... click view for more details
Driver Station in box - 6 Colors
This is a driver station also called a controller hook up panel. Accepts banana plugs or aligator clips. 10 amp Direction switch. Compatible with electronic controllers. LED indicators. *** NOW IN COLOR
Also get the Mini Relay panel, highly recommended for a super easy installation.
- Switch is used so you can drive in either direction
- Dual color LED for power, so you know if you are wired common negative or common positive, useful when using electronic controllers
- 2.5 amp resettable fuse. They are easily bypassed if needed
- Terminal screw on the back side, no soldering required
- Post can accommodate banana plugs or alligator clips
Measures: 4.3" x 2.25" 1.2" deep (108mm x 57mm 28mm deep)
Also available with out the box part# TM103
- Controller Hookup posts take Alligator clips or banana plugs
- Forward/reverse direction switch
- 2 self-resetting circuit protectors, one on the input and one on the brake line. A fault LED will come on if the controller is plugged incorrectly
- 4 statusLEDs - Very useful when wiring or troubleshooting.
- High quality terminal screw connections, no soldering or crimping required.
- Super easy to wire - two wires to power, two wires to track rails
- One year warranty
- Toll free support if required 877-756-8227
See video below on how to solder wires to track rails
SCP-2 analog Slot it Controller Universal Home / Club Racing (all polarity)(Replaces the need to select correct polarity) Electronic controller for slotcars, no need to have several controllers with different resistor values. Fully adjustable.
Brand: Trackmate Racing
High quality power distribution box, no soldering or crimping required. Simply strip 3/16 inch from wire end and insert and screw down. One input and 6 power tap outputs. One required per lane. Board can be removed and then box can be securely screwed down for easy mounting.
Save dollars on your Slot car lap counter. This is a Do It Yourself version of the prewired LED kit. All the parts included to make an overhead light source for an infrared lap counter. Includes instructions, power adapter, LEDs, heat shrink, Connector and wire.
The perfect relay panel for 1:24 scale commercial tracks that run on batteries or 50 amp to 95 amp power supplies. Relay panel comes with 8 relays and master relay. Can be easily connected to Trackmate interface.