Serial Cable - Select Length

Reference: PD6

Brand: Trackmate Racing

Track Power Tap Distribution Box

High quality power distribution box,  no soldering or crimping required. Simply strip 3/16 inch from wire end and insert and screw down.  One input and 6 power tap outputs.  One required per lane.  Board can be removed and then box can be securely screwed down for easy mounting.

Reference: GANTRY

Brand: Trackmate Racing

Gantry

Gantry (Bridge) Uses infrared LEDs for light source. Recommended when using infrared sensors for lap counter . Includes DC adapter. Wires can go through table and be completely hidden. (Track not included).   Click view and select type

Reference: flood8xx

Brand: Trackmate Racing

Infrared flood bar + adapter

https://youtu.be/7NRAQ25uLaI?si=04Kl-lH8VNNlePq4&t=146Infrared Flood Bar,   No alignment with sensors required.   Select length required  12 Volt adapter included.  

Reference: RLY4

Custom 4 Lane Relay Board With RJ45 Cable

Relay panel with 4 relays, one per lane giving the ability to control each lane individualy.  Call for details

Reference: 12v500ma

12V Adapter, 500mA

12 volt adapter. 500ma.  For Slot car interface.  Replaces older 9 volt adapters that were used in the past.Also used on LED Bridge/Gantries.  

Reference: ban3

Set of Banana Plugs - Black, Red, White

3 banana plugs in white, black and red colors.   Solder to controller wires

Reference: 12v1600n

12V Adapter, 1.6 Amps

12 volt adapter rated to  1.6 amps.  Used on Sell time units with 4 to 8 relays.    Required if you want to power more than 3 relays on a Trackmate interface.  

Reference: ac232

USB to serial

USB to serial.  Required if your computer does not have a 9 pin serial port and only has USB ports.  New computers will most likely require the USB to serial.

Reference: RLY8

Slot Car Track Relay Panel For 'Sell Time'

The perfect relay panel for 1:24 scale commercial tracks that run on batteries or 50 amp to 95 amp power supplies.  Relay panel comes with 8 relays and master relay.  Can be easily connected to Trackmate Commerical Interface. 

12V Power Adapter

12 volt 500ma replacement power pack/ adapter  RC lap counter, Slot car lap counter, Drag_Pro2000/3000  

Reference: Reed-4

Brand: Trackmate Racing

Reed Switches

Four Reed switches for $14, Including heat shrink, Keep spares.  Normally used with HO slot car lap counters.

Reference: TM103

Brand: Trackmate Racing

Slot Car Driver Station

This is a driver station also called a controller hook up panel.  Accepts banana plugs or aligator clips.   10 amp Direction switch.  Compatible with electronic controllers.   LED indicators.   

Reference: 113

Set of Alligator Clips - Black, Red, White

3 Alligator clips in White, Black and Red colors. Solder to controller wires

Reference: Sens-4

Infrared Sensors Set of 4 with heat shrink

Infrared Sensors,

Reference: flood850n

Brand: Trackmate Racing

Infrared Flood Bar

Infrared Flood Bar assembled,  A light source for sensors in the track.  No alignment required.   Select the length you need.      

2 Conductor 18 Gauge Wire, 100 feet

2 conductor 18 gauge wire 100 feet  red and black,  Ideal for wiring HO or 1:32 scale tracks.