Reference: T1601rc
Brand: Trackmate Racing
Transponder
Trackmate Iridium transponder for RC car.New version, half the size.
Reference: T1601rc
Brand: Trackmate Racing
Trackmate Iridium transponder for RC car.New version, half the size.
Reference: DL961
Brand: Trackmate Racing
New in version 9.72 Feb, 2023 A software download link will be sent via email. May take up to 1 Hour Software for slot car lap counter. Requires Trackmate hardware. Also has a demo mode which simulates races that requires no hardware... click view for more details
Reference: Iridium-m
Brand: Trackmate Racing
Compatible with the Trackmate RC lap counter. Installed in a bridge that goes across the track. Each one can cover 14.5"(36cm). Connecting cable is included.
Reference: DP3001-SELECT
Brand: Trackmate Racing
Guide Flag Sensor. Stock some spares. Enter Track Thickness in Text field and click save
Reference: 810
Brand: Trackmate Racing
Complete package hardware and software. Infrared RC Lap Counter / Timer for radio Controlled cars. This is everything you need to start racing on a track that is 10 feet wide.
Reference: trans-10
Brand: Trackmate Racing
SAVE 34% Transponders pack of 10 for R/C cars
Gantry (Bridge) Uses infrared LEDs for light source. Recommended when using infrared sensors for lap counter . Includes DC adapter. Wires can go through table and be completely hidden. (Track not included). Click view and select type
Contact Trackmate for Custom Bridges
Dimensions in inches
Lanes | Width Inside | With Feet | Lane Spacing | ||
Carrera | 2 | 7.80 | 9.00 | 3.9 | |
Carrera | 4 | 15.60 | 16.80 | 3.9 | |
Carrera | 6 | 23.40 | 24.60 | 3.9 | |
HO | 4 | 6.00 | 7.20 | 1.5 | |
HO | 6 | 9.00 | 10.20 | 1.5 | |
MaxTrax | 4 | 10.25 | 11.45 | 1.75 | |
Scalextric | 4 | 12.30 | 13.50 | 3.0 | |
Scalextric | 6 | 18.50 | 19.70 | 3.0 | |
Bowman | 4 | 9 | 10.2 | 1.5 | |
Bowman | 6 | 12.3 | 13.5 | 1.5 | |
Ninco | 2 | 7.8 | 9.0 | 3.5 | |
Ninco | 4 | 15.6 | 16.8 | 3.5 | |
Ninco | 6 | 23.4 | 24.6 | 3.5 |
Dimensions in mm
Lanes | Width Inside | With Feet | Lane Spacing | ||
Carrera | 2 | 198mm | 228mm | 99mm | |
Carrera | 4 | 396mm | 427mm | 99mm | |
Carrera | 6 | 595mm | 625mm | 99mm | |
HO | 4 | 152mm | 183mm | 38mm | |
HO | 6 | 229mm | 259mm | 38mm | |
MaxTrax | 4 | 260mm | 291mm | 45mm | |
Scalextric | 4 | 312mm | 343mm | 76mm | |
Scalextric | 6 | 470mm | 500mm | 76mm | |
Bowman | 4 | 229mm | 259mm | 38mm | |
Bowman | 6 | 312mm | 343mm | 38mm |
Reference: 12v500ma
12 volt adapter. 500ma. For Slot car interface. Replaces older 9 volt adapters that were used in the past.Also used on LED Bridge/Gantries.
2 conductor 18 gauge wire 100 feet red and black, Ideal for wiring HO or 1:32 scale tracks.
Reference: CVGA-XX
Brand: Trackmate Racing
VGA extension cable - click view button and select length 15 pin Male / Female cable
2 conductor 18 gauge wire 25' red and black, Ideal for wiring HO or 1:32 scale tracks.
Reference: TM104
Brand: Trackmate Racing
This is a driver station also called a controller hook up panel. Accepts banana plugs or aligator clips. 10 amp Direction switch. Compatible with electronic controllers. LED indicators.
Reference: Reed-4
Brand: Trackmate Racing
Four Reed switches for $14, Including heat shrink, Keep spares. Normally used with HO slot car lap counters.
Reference: ban3
3 banana plugs in white, black and red colors. Solder to controller wires
Reference: RLY4
Relay panel with 4 relays, one per lane giving the ability to control each lane individualy. Call for details
Reference: SC106
Brand: Trackmate Racing
For 6 lanes. Makes connecting to relay very easy, 2 terminal screws for each lane. Two terminal screws for relay coil.
Reference: 113
3 Aligator clips in White, Black and Red colors. Solder to controller wires
Reference: flood850n
Brand: Trackmate Racing
Infrared Flood Bar assembled, A light source for sensors in the track. No alignment required. Select the length you need.
Reference: PD6
Brand: Trackmate Racing
High quality power distribution box, no soldering or crimping required. Simply strip 3/16 inch from wire end and insert and screw down. One input and 6 power tap outputs. One required per lane. Board can be removed and then box can be securely screwed down for easy mounting.
Reference: flood8xx
Brand: Trackmate Racing
https://youtu.be/7NRAQ25uLaI?si=04Kl-lH8VNNlePq4&t=146Infrared Flood Bar, No alignment with sensors required. Select length required 12 Volt adapter included.
Reference: TM103
Brand: Trackmate Racing
This is a driver station also called a controller hook up panel. Accepts banana plugs or aligator clips. 10 amp Direction switch. Compatible with electronic controllers. LED indicators.
Reference: SC104
Brand: Trackmate Racing
Makes connecting to relay very easy, 2 terminal screws for each lane. Two terminal screws for relay coil.
Reference: TM104-BLK
Brand: Trackmate Racing
This is a driver station also called a controller hook up panel. Accepts banana plugs or aligator clips. 10 amp Direction switch. Compatible with electronic controllers. LED indicators. *** NOW IN COLOR