Reference: T1601rc
Brand: Trackmate Racing
Transponder
Trackmate Iridium transponder for RC car.New version, half the size.
Reference: T1601rc
Brand: Trackmate Racing
Trackmate Iridium transponder for RC car.New version, half the size.
Reference: DL961
Brand: Trackmate Racing
New in version 9.72 Feb, 2023 A software download link will be sent via email. May take up to 1 Hour Software for slot car lap counter. Requires Trackmate hardware. Also has a demo mode which simulates races that requires no hardware... click view for more details
Reference: Iridium-m
Brand: Trackmate Racing
Compatible with the Trackmate RC lap counter. Installed in a bridge that goes across the track. Each one can cover 14.5"(36cm). Connecting cable is included.
Reference: DP3001-SELECT
Brand: Trackmate Racing
Guide Flag Sensor. Stock some spares. Enter Track Thickness in Text field and click save
Reference: 810
Brand: Trackmate Racing
Complete package hardware and software. Infrared RC Lap Counter / Timer for radio Controlled cars. This is everything you need to start racing on a track that is 10 feet wide.
Reference: trans-10
Brand: Trackmate Racing
SAVE 34% Transponders pack of 10 for R/C cars
This is a driver station also called a controller hook up panel. Accepts banana plugs or aligator clips. 10 amp Direction switch. Compatible with electronic controllers. LED indicators. *** NOW IN COLOR
Also get the Mini Relay panel, highly recommended for a super easy installation.
Measures: 4.3" x 2.25" 1.2" deep (108mm x 57mm 28mm deep)
Also available with out the box part# TM103
Features
See video below on how to solder wires to track rails
Tip: Use 18 gauge wire when soldering to the rails, bigger wire will be extremely difficult.
Reference: SC104
Brand: Trackmate Racing
Makes connecting to relay very easy, 2 terminal screws for each lane. Two terminal screws for relay coil.
2 conductor 18 gauge wire 25' red and black, Ideal for wiring HO or 1:32 scale tracks.
2 conductor 18 gauge wire 100 feet red and black, Ideal for wiring HO or 1:32 scale tracks.
Save dollars on your Slot car lap counter. This is a Do It Yourself version of the prewired LED kit. All the parts included to make an overhead light source for an infrared lap counter. Includes instructions, power adapter, LEDs, heat shrink, Connector and wire.
Reference: PD6
Brand: Trackmate Racing
High quality power distribution box, no soldering or crimping required. Simply strip 3/16 inch from wire end and insert and screw down. One input and 6 power tap outputs. One required per lane. Board can be removed and then box can be securely screwed down for easy mounting.
12 volt 500ma replacement power pack/ adapter RC lap counter, Slot car lap counter, Drag_Pro2000/3000
Reference: SC104
Brand: Trackmate Racing
Makes connecting to relay very easy, 2 terminal screws for each lane. Two terminal screws for relay coil.
Reference: TM104-BLK
Brand: Trackmate Racing
This is a driver station also called a controller hook up panel. Accepts banana plugs or aligator clips. 10 amp Direction switch. Compatible with electronic controllers. LED indicators. *** NOW IN COLOR
Reference: flood8xx
Brand: Trackmate Racing
https://youtu.be/7NRAQ25uLaI?si=04Kl-lH8VNNlePq4&t=146Infrared Flood Bar, No alignment with sensors required. Select length required 12 Volt adapter included.
Reference: 12v1600n
12 volt adapter rated to 1.6 amps. Used on Sell time units with 4 to 8 relays. Required if you want to power more than 3 relays on a Trackmate interface.
Reference: SCLW
Wireless track call button, will require to solder 2 wires to the Tackmate interface, instructions included. Works up to 60 feet!
Reference: 113
3 Aligator clips in White, Black and Red colors. Solder to controller wires
Reference: CVGA-XX
Brand: Trackmate Racing
VGA extension cable - click view button and select length 15 pin Male / Female cable
Reference: flood850n
Brand: Trackmate Racing
Infrared Flood Bar assembled, A light source for sensors in the track. No alignment required. Select the length you need.
Reference: SC106
Brand: Trackmate Racing
For 6 lanes. Makes connecting to relay very easy, 2 terminal screws for each lane. Two terminal screws for relay coil.
Reference: 12v500ma
12 volt adapter. 500ma. For Slot car interface. Replaces older 9 volt adapters that were used in the past.Also used on LED Bridge/Gantries.
Reference: v104
Brand: Trackmate Racing
Electronic Video Splitter, Does not degrade video quality, Connect up to 4 monitors to your PC, so all racers can view race results. Includes 6' VGA cable to plug splitter into PC