Reference: T1601rc
Brand: Trackmate Racing
Transponder
Trackmate Iridium transponder for RC car.New version, half the size.
Reference: T1601rc
Brand: Trackmate Racing
Trackmate Iridium transponder for RC car.New version, half the size.
Reference: DL961
Brand: Trackmate Racing
New in version 9.72 Feb, 2023 A software download link will be sent via email. May take up to 1 Hour Software for slot car lap counter. Requires Trackmate hardware. Also has a demo mode which simulates races that requires no hardware... click view for more details
Reference: Iridium-m
Brand: Trackmate Racing
Compatible with the Trackmate RC lap counter. Installed in a bridge that goes across the track. Each one can cover 14.5"(36cm). Connecting cable is included.
Reference: 810
Brand: Trackmate Racing
Complete package hardware and software. Infrared RC Lap Counter / Timer for radio Controlled cars. This is everything you need to start racing on a track that is 10 feet wide.
Reference: DP3001-SELECT
Brand: Trackmate Racing
Guide Flag Sensor. Stock some spares. Enter Track Thickness in Text field and click save
Reference: trans-10
Brand: Trackmate Racing
SAVE 34% Transponders pack of 10 for R/C cars
There are 142 products.
Reference: TMv971demo
Brand: Trackmate Racing
Bracket Racing tournament software demo. This a demo and can do 10 cars, Add to cart checkout at no cost and you will receive an emial with a link to download the software, check your spam inbox if you don't see it, it may also take 20 minutes. Version .971 updated Dec 17, 2022
Reference: 113
3 Aligator clips in White, Black and Red colors. Solder to controller wires
Reference: FUTY4
Brand: Trackmate Racing
Servo Y cableTransponder plugs into an empty receiver channelSometimes a Y cable is required if there is no available channel on receiver for transponder to plug into.
Brand: Trackmate Racing
Miniz connector to old style miniz connection. Eylets connect to battery compartment
Reference: TR28867
1 part white paper roll. Compatible with SP512, SP200 Printers. Print 300 races on one roll. You can select number of copies in software.
Reference: ban3
3 banana plugs in white, black and red colors. Solder to controller wires
Reference: Jumbo
Track call button. Start and pause race. Normally uses with the relay option. Connect one or many.
Reference: DL961
Brand: Trackmate Racing
New in version 9.72 Feb, 2023 A software download link will be sent via email. May take up to 1 Hour Software for slot car lap counter. Requires Trackmate hardware. Also has a demo mode which simulates races that requires no hardware... click view for more details
Adapter to use existing 25 pin sensor cable with the newer Trackmate black Interface SCL3-USB with RJ45 8 pin connector. Will only work with 1 to 4 lane cables.
Reference: TR-misc
Brand: Trackmate Racing
Need a timing solution but can't find anything that will do the job.... give us a call. We can take one of our existing products and customize it for your needs.
Reference: cds1
Brand: Trackmate Racing
Custom build, parts, modfications
2 conductor 18 gauge wire 25' red and black, Ideal for wiring HO or 1:32 scale tracks.
Reference: IRSENSORS
Brand: Trackmate Racing
4 infrared sensors, includes heat shrink. Keep spares
Reference: RLY12V30
Brand: Trackmate Racing
Relay to control track power. Also see our Mini relay panel for super easy connections.
Four Infrared LEDs. These LEDs are extremely good. Good range and uniform cover. Perfect alignment is not required. Also check out our complete LED kit with adapter.
Reference: 12v500ma
12 volt adapter. 500ma. For Slot car interface. Replaces older 9 volt adapters that were used in the past.Also used on LED Bridge/Gantries.
12 volt 500ma replacement power pack/ adapter RC lap counter, Slot car lap counter, Drag_Pro2000/3000
Reference: Reed-4
Brand: Trackmate Racing
Four Reed switches for $14, Including heat shrink, Keep spares. Normally used with HO slot car lap counters.
Reference: PD6
Brand: Trackmate Racing
High quality power distribution box, no soldering or crimping required. Simply strip 3/16 inch from wire end and insert and screw down. One input and 6 power tap outputs. One required per lane. Board can be removed and then box can be securely screwed down for easy mounting.
20 foot cable that goes between overhead bridge and decoder. This cable is also included in our systems.
Reference: usbab-15
USB cable Type AB for Trackmate interface SCL3usb. 15ft long. This is longest USB cable you can use.
Reference: DP3001-SELECT
Brand: Trackmate Racing
Guide Flag Sensor. Stock some spares. Enter Track Thickness in Text field and click save
Brand: Trackmate Racing
Need a timing solution but can't find anything that will do the job.... give us a call. We can take one of our existing products and customize it for your needs.
Reference: CBL-9EXT-30
Brand: Trackmate Racing
Serial Cable. Long serial cables allow computer to be far away from the track. Can be used with Red or Green Trackmate SCL slot car interface, DP3000, DP2000.
Reference: 12v1600n
12 volt adapter rated to 1.6 amps. Used on Sell time units with 4 to 8 relays. Required if you want to power more than 3 relays on a Trackmate interface.
40 foot cable that goes between overhead bridge and decoder. If you need to have your computer far away from the bridge.
Reference: SCL-USB
Brand: Trackmate Racing
Includes all Trackmate software and drivers. Software only on name brand Kingston 8GB Flashdrive. May not be exactly as shown. We also provide free downloads with all our products.
2 conductor 18 gauge wire 100 feet red and black, Ideal for wiring HO or 1:32 scale tracks.
Reference: DP3002-Select
Brand: Trackmate Racing
Prestage / Stage Guide Flag Sensor. Stock some spare sensors.
Save dollars on your Slot car lap counter. This is a Do It Yourself version of the prewired LED kit. All the parts included to make an overhead light source for an infrared lap counter. Includes instructions, power adapter, LEDs, heat shrink, Connector and wire.
Reference: Iridium-m
Brand: Trackmate Racing
Compatible with the Trackmate RC lap counter. Installed in a bridge that goes across the track. Each one can cover 14.5"(36cm). Connecting cable is included.
Reference: C100
100 foot cable that goes between overhead bridge and decoder. If you need to have your computer far away from the bridge.
Brand: Trackmate Racing
Need a timing solution but can't find anything that will do the job.... give us a call. We can take one of our existing products and customize it for your needs.